Home > Products > Classification by Material > Perforated Stainless Steel Sheet

Perforated Stainless Steel Sheet

Stainless Steel Perforated MetalOur stainless steel sheet is either T304 stainless steel sheet or T316 stainless steel sheet that has been punched with a series of holes to give you a nominated pattern. The pattern can vary depending on the hole size, distance between holes and the thickness of the material.

Perforated stainless steel has many various uses, including catering for the architectural, chemical, mining & refining, the uses are endless.

We has had the ability to perforate for several years. Whether a simple round hole pattern or a complicated multi tool pattern we has the ability to perforate to customer requests and specifications.

Perforated stainless steel sheet is essentially a low carbon steel which contains chromium at 10% or more by weight. The chromium content of the steel allows the formation of a rough, adherent, invisible, corrosion-resisting chromium oxide film on the steel surface. If damaged mechanically or chemically, this film is self-healing, providing that oxygen, even in very small amounts, is present.

Stainless steels can be divided into three basic groups based on their crystalline structure: austenitic, ferritic, and martensitic.

Austenitic

Austenitic stainless steels are non-magnetic non heat-treatable steels that are usually annealed and cold worked. Some austenitic steels tend to become slightly magnetic after cold working. Austenitic steels have excellent corrosion and heat resistance with good formability over a wide range of temperatures. Additions of molybdenum can increase the corrosion resistance.

Typical industry applications: Food equipment, chemical equipment, architectural applications

- 304 Low carbon modification of type 302 for restriction of carbide precipitation during welding.

- 304L Extra-low carbon modification of type 304 for further restriction of carbide precipitation during welding.

- 316 Higher corrosion resistance than types 302 and 304, high creep strength.

- 316L Extra low carbon modification of types 316, used in welded construction where intergranular carbide precipitation must be avoided.

- 321 Stabilized for welds subject to severe corrosive conditions and for service from 800 to 1600F

Ferritic

Ferritic stainless steels are magnetic non heat-treatable steels that contain chromium but not nickel. They have good heat and corrosion resistance, in particular sea water, and good resistance to stress-corrosion cracking. Their mechanical properties are not as strong as the austenitic grades, however they have better decorative appeal.

Typical industry applications: Automotive trim, cooking utensils

- 430 General purpose non-hardenable chromium type.

Martensitic

Martensitic grades are magnetic and can be hardened by heat treatment. They are not as corrosive resistant as austenitic or ferritic grades, but their hardness levels are among the highest of the all the stainless steels.

Typical industry applications: Fasteners, pump shafts, turbine blades

- 410 General purpose heat treatable type.

 

Here is the stainless steel sheet (304) specifications:

Thickness  Diameter  Dimension 
0.50 mm 0.50 mm 1000 x 2000 mm
0.75mm 0.75mm 1000 x 2000 mm
0.80mm 0.80mm 1000 x 2000 mm
1.00mm 1.00mm 1000 x 2000 mm
1.00mm 1.25mm 1000 x 2000 mm
1.50mm 1.50mm 1000 x 2000 mm
1.50mm 2.00mm 1000 x 2000 mm
2.00mm 2.00mm 1000 x 2000 mm
2.00mm 2.50mm 1000 x 2000 mm
2.00mm 3.00mm 1000 x 2000 mm
3.00mm 3.00mm 1000 x 2000 mm
3.00mm 4.00mm 1000 x 2000 mm
3.00mm 5.00mm 1000 x 2000 mm
4.00mm 4.00mm 1000 x 2000 mm
4.00mm 5.00mm 1000 x 2000 mm

Black iron perforated metal specifications:

Thickness  Diameter  Dimension 
0.50 mm 0.50 mm 1000 x 2000 mm
0.75mm 0.75mm 1000 x 2000 mm
0.80mm 0.80mm 1000 x 2000 mm
0.70mm 1.00mm 1000 x 2000 mm

 

If you need to consult the price, please contact the business department by e-mail:

#

When you contact us, please provide your detail requirements.
That will help us give you a valid quotation.